Honda CBR 600RR 21/24 Race Airfilter

Description

Race / Track Airfilter for CBR600RR ’21/’24  , installation like original filter , no modifications needed

___________________________________________________

The MWR Full Race Airfilter is developed on track , developed for race bikes NOT for roadbikes , not on dynamometer but in real life , on track , professional race bikes with data loggers . protection is on the same level as the performance filter & “HE” filter only for a shorter time due to the much more open structure of the foam materials.

Unlike all other sports filters the race filter creates a much better , equal airflow over all cylinders , means you need to adapt fueling of all cylinders separately to achieve maximum effect of the “HE” filter . Concerns all twins , V-twins , three , four , and V4 engines

Remapping the ECU or Fuel Control Module is highly recommended .

The difference between our roadbike and racebike filters

The foam material of our racing filters have a much more open structure compared to the roadfilters foam material which makes the duration of the maintenance much shorter , the protection is at the same level as our roadbike filters but for a shorter time , therefore the maintenance is much more intensive. Maintenance frequency for racebike filters are after every two race weekends. Therefore are racebike filters are NOT suitable for roadbikes

Our roadbike filters have a recommended maintenance frequency of once a year …. regardless the milage .

Even when you have ridden 50 miles that year stick to the guidelines , priority for the filter is that the foam must not dry out , keep it “wet” from oil

In countries around the Equator with high temperature and high humidity , the frequence must shortened to twice a year . Racebike filter can stay with the normal frequency of maintenance

Only MWR Biodegradable filter oil and Biodegradable filters cleaner may be used to protect the filter also from backfire.

Guidelines for Maintainance the MWR Airfilters

How to clean your MWR filter

1) Immerse the filter in MWR filtercleaner for 30 minutes

2) Wash the filter in hot water with dishwatersoap

3) rinse the filter with clear water untill all soap is out of the filter

4) Let the filter dry

5) When the filter is completly dry spray the filter on both sides with oil and massage the oil gently in the foam , make sure there is no dry place left .When you have a normal can with oil hold the filter almost vertical and gently drop oil onto the filter on both sides , then massage the oil gently into the foam

MWR maintainance products

MWR-001 : MWR maintainance set 250ml

MWR-002 : MWR maintainance set 250ml spraycan

MWR-003 : 1Ltr MWR airfilter oil

MWR-004 : 1Ltr MWR airfilter cleaner