Ducati Installation Bracket for Hypermotard 950/950 RVE/950 SP

Description

MWR developed an exceptional filter for the Hypermotard 950 , the complete air filter lid is replace by the new MWR high performance filter. A much larger inlet opening of the airbox , resulting in much greater airflow with much more power than any other sportsfilter ……. we cannot rule out the increase of the beautiful induction noise.

MWR developed a installation bracket for installing the ECU at the original location with no damage filter or ECU or other modifications

Filter and installation bracket can be purchased separately or as set

Part.nr filter : MC-020-19

Part.nr. installation bracket : MWR-MC-020-19

Part.nr. complete set : MC-022-19

1) Remove original airfilter lid + original filter

2) Place filter and with all six screws half way down . then tighten them all six

3) Check if the installation lips bend in the right angle

4) Loosen and remove the bottom four screws again

5) Place the MWR installation bracket and tighten it with the new included screws

6) Place the gummi ECU holder again like original

___________________________________________________

The MWR Performance Airfilter = excellent performance and max. protection . Not a copy of the original filter , always searching for solutions regarding performance , protection or fitment , some models therefore deviate from the original.

Tuning like all other sports filters