Rapid Bike Evo – Kawasaki Z 1000 / R 2017 – 2020

Description

Evolution of the technology and experience gained through RapidBike1, 2 and 3 is an add-on module that interposes between the original ECU and the injectors.

It combines extraordinary high performance with user-friendliness thanks to the self-adaptive feature: RapidBike EVO does not require additional modules to reach this performance, as it includes all the required features in its own working.

Objective of this application is total injection control, which means the total control of the air/fuel ratio through the management of all the injectors (up to eight) and of the oxygen sensors. RapidBike EVO allows to work on injection timing (range from -100% to +150% compared to the original parameters) and on air/fuel ratio related to carburetion.

When driving the motorbike, the self-adaptive feature determines the automatic self-correction of the air/fuel ratio maps: this active management is added up to the pre-set parameters. The adjustments set by RapidBike EVO improve the engine efficiency in order to reach the best performance.

The self-correction process is set in multipoint technology according to RPM and TPS, for the whole range of the engine working, even when the original RPM limiter is raised (when available).

The chart (click to enlarge) displays the definite progressive improvement of the map from 0 (red trace) after 50 km (green trace) and after 200 km (brown trace). Other remarkable features are the possibility to raise the RPM limiter (up to + 1.000 RPM) and the cut of the speed limiter.

RapidBike EVO also supports the management of multiple maps, which means the possibility to calibrate and activate two sets of injection maps with different self-adaptive settings in order to ?change air/fuel ratio? with a simple switch.

For two-cylinder engine motorbikes, RapidBike EVO allows to set a map with specific self-adaptive corrections for each cylinder to optimize the engine efficiency.

By using the software downloaded from the website, through the USB device provided or purchased for the RB Evo kits before 12/02/2011, the rider can tune his own map and set new self-adaptive parameters anytime, so to get the performance desired.

Technical features common to Rapid Bike EVO and RACING

• Plug & Play applications through the supplied original connectors;
• Wiring and modules totally impermeable;
• All the wiring are created to support both RapidBike EVO and RACING;
• External frame of the module realised in aluminium alloy, internal insulation with epoxy resins;
• Standard specific manufacturing for the Automotive sector (electromagnetic compatibility, resistance to shock/vibration, temperature excursion and weathering agents);
• Self-adaptiveness of injection, RPM, speed limiters and multi-map management;

Modules are firmware upgradable, which means if you change bikes all you have to do is buy a new harness and we will update the firmware for the new bike, NEW MODULE NOT REQUIRED.